Filter
Top Products
4Fax
76 Xerox Phaser 3635MFP User Guide
Delay Send
Delayed Send enables you to specify the time of a fax transmission or poll.
This option can be used to delay transmission of a fax job for a minimum
period of 15 minutes and a maximum period of 23hrs 59mins, by specifying
the time at which the fax is to be sent.
Select Off to send the fax immediately.
Select Specific Time to enter the time you wish the fax to be sent. Enter the
hours and minutes separately and press AM or PM to denote if you want the
fax to be sent in the morning or the evening.
Send Header Text
Select On to enable transmission header details on outgoing faxes. To format
Transmission Header details, refer to Transmission Header Text in the Setups
chapter on page 173.
Mailboxes
Mailboxes are areas of machine memory where incoming faxes are stored or
from which outgoing faxes can be polled (see Polling – page 74). The System
Administrator can set up to 20 mailboxes on your machine.
You can use a mailbox located on the same machine you are using (local
mailbox), or a mailbox set up on a remote machine (remote mailbox).
Local mailboxes can contain both stored or received documents. Stored
documents are placed in the local mailbox by the user standing at the device;
received documents are placed in the local mailbox by a remote fax device.
The local mailbox may be password protected and a local user can delete or
print the contents of the mailbox.
Documents held within the local mailbox are recognized as stored for polling,
printing or deleting by the user. To access a mailbox you must enter the 3 digit
mailbox number and, if applicable, a 4 digit mailbox passcode. Please contact
your System Administrator for more information.
NOTE: The storage time for faxes is set up by your System Administrator.
Store to Mailbox Allows users to scan and store fax documents for polling. Documents are
stored in your mailbox and automatically sent to a remote fax machine when
requested.
1. Enter Mailbox number (max 20 digits).
2. Enter Mailbox passcode (4 digit code).
3. Press Start.