Filter
Top Products
Paper and Media
124 Xerox
®
WorkCentre
®
6605 Color Multifunction Printer
User Guide
− For 1-sided printing, load letterhead or pre-printed face up with the top edge going into the
printer.
− For 2-sided printing, load letterhead and pre-printed face down with the top edge going into
the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
6. Adjust the width guides until they touch the edges of the paper.
7. If the control panel prompts you, verify the size and type on the screen. To make changes:
a. Touch Size, then touch an option for a standard paper size.
b. Touch Type, then touch an option for the paper type.
c. Touch OK.
Configuring Trays 1 or 2 for the Paper Length
You can adjust the lengths of trays 1 and 2 to accommodate A4/Letter and Legal paper sizes. In the
Legal length settings, the trays protrude from the front of the printer.
To change the 550-Sheet Feeders in the trays to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.