Filter
Top Products
Installation and Setup
88 Xerox
®
WorkCentre
®
6605 Color Multifunction Printer
User Guide
Configuring the Authentication System
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. In the Properties pane, to expand the menu, click the plus (+) symbol next to the Security folder.
4. Click Authentication System.
5. For Authentication Type (for User Authentication), select an authentication system settings option.
6. To configure the Kerberos Server, click Kerberos Server.
7. To configure the LDAP Directory settings, click LDAP Server.
8. To configure Xerox Secure Access Settings, click Xerox Secure Access Settings.
9. For Authentication Type (for Server Address/Phone Book), select an authentication type option.
10. To configure the Kerberos Server, click Kerberos Server.
11. To configure the LDAP Directory settings, click LDAP Server.
12. Under Option Information, for the Server Response Timeout and Search Timeout, enter the timeout
in seconds.
13. Click Save Changes.
LDAP User Mapping
LDAP servers display different results depending on how they implement mappings. Use this page to
map LDAP fields to fields on your printer. Editing current map settings allows you to fine-tune server
search results.
Before you begin:
• Ensure that you have configured the LDAP server settings. For details, see LDAP on page 87.
• Ensure that you have set LDAP for authentication. For details, see Configuring LDAP Authentication
on page 90.
• Ensure that LDAP is enabled. For details, see Network Authentication on page 86.
• Ensure that Network Authentication is enabled. For details, see Configuring Secure Settings.
To define LDAP user mappings:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. Click Properties>Protocols>LDAP User Mappings.
3. In the User Mapping fields, type the information. For example, the Surname and Given Name fields
allow you to search for the last and first name of the user.
4. If Network Authentication is enabled, the Home field appears. The Home field indicates the location
the personal directory of the user. The system administrator defines the default for homeDirectory
when the user account is created.
5. Click Save Changes.