Filter
Top Products
Troubleshooting
Xerox
®
WorkCentre
®
6605 Color Multifunction Printer 261
User Guide
Symptom Probable Causes Solutions
Colors are blurry or there is white
area around objects.
Color-to-color alignment is not
correct.
Perform an automatic color registration
adjustment. For details, see Color
Registration on page 219.
Blotchy or mottled images.
The paper is too light or too thin. Choose a different paper type at the control
panel, in the application, and in the printer
driver.
The paper is damp. Replace the paper.
The humidity is too high. Reduce the humidity in the room or move the
printer to a new location.
Spots or lines appear at regular
intervals on the prints.
One or more of the components
in the paper path is marking the
paper.
To determine the cause, measure the
distance between the print defects.
• 75.3 mm (3 in.) - Imaging Unit
• 28.3 mm (1.1 in.) - Imaging Unit
• 31.1 mm (1.2 in.) - Imaging Unit
• 32.3 mm (1.3 in.) - Imaging Unit
• 25.1 mm (1 in.) - Transfer Belt
• 56.5 mm (2.2 in.) - Transfer Roller
• 82.3 mm (3.2 in.) - Fuser
If the repeating defects match one of these
distances, replace that item.