Filter
Top Products
Copying
164 Xerox
®
WorkCentre
®
6605 Color Multifunction Printer
User Guide
Changing the Saturation
1. Touch Saturation, then select an option.
2. Touch OK.
Changing Auto Background Suppression
1. Touch Auto Background Suppression, then select an option.
2. Touch OK.
Changing Auto Background Suppression Level
1. Touch Auto Background Suppression Level, then select an option.
2. Touch OK.
Changing the Default Color Balance
The Color Balance control allows you to adjust the print color of your printer. Each of the four primary
colors of red, green, blue, and gray balance, have five density settings. The density settings adjust the
output based on the level of color saturation. Adjusting the setting negatively lowers the density and
lightens the output. Adjusting the setting positively increases the density and darkens the output.
Examples of low density areas include faces and sky.
To change the default color balance:
1. Touch Color Balance.
2. Touch the color you want to adjust.
3. To adjust the default density setting from -3 through +3, touch - or +.
4. Touch OK.
Changing 2-Sided Copying
1. Touch 2-Sided Copying.
2. Touch one of the following:
− 1 - 1 Sided
− 1 - 2 Sided
− 2 - 1 Sided
− 2 - 2 Sided
3. To rotate the image on side 2 by 180 degrees, touch Rotate Side 2.
4. Touch OK.