Filter
Top Products
System Guide Printing
Common Controller 5-3
’You will need to Restart the DocuSP Software for
changes to take effect’
•If n for no is entered, the following will appear:
‘No Change Made’
• If FIFO Job Scheduling has previously been enabled, the
following will appear:
‘Currently FIFO Job Scheduling is on’
’Do you wish to disable FIFO Job Scheduling? (y/n)’
• Disable FIFO Job Scheduling by typing y for yes.
The following message will appear:
‘Disabling FIFO Job Scheduling’
’You will need to Restart the DocuSP Software for
changes to take effect’
•If n for no is entered, the following will appear:
‘No Change Made’
6. In the DocuSP Print Services, select [System] and select
[Restart] to complete either enabling or disabling the Limited
FIFO Job Scheduling option.
With FIFO Job Scheduling enabled, the Controller will schedule
jobs for printing in the order that Job ID’s are assigned to
incoming jobs. Therefore, if Job ID 2 completes its “Receiving
Data” status and goes “Pending” before Job ID 1, Job ID 1 will
still be scheduled for print before Job ID 2.
With FIFO Job Scheduling disabled, the Controller will schedule
the jobs for print as soon as they complete their “Receiving Data”
status in Job Manager. Therefore, Job ID 2 will be scheduled for
print before Job ID 1 if Job ID 2 goes “Pending” before Job ID 1.
The following table illustrates an example of FIFO Job
Scheduling.
Table 5-1.
Event
Sequence Job ABC Job XYZ
Limited FIFO
Enabled
Limited FIFO
Disabled
1 Received, assigned
Job ID 1
2 “Receiving Data” Received, assigned
Job ID 2
3 Still “Receiving Data” “Receiving Data”