Filter
Top Products
System Guide Printing
Common Controller 5-5
You may set the site default for the PCL decomposer line
termination. Setting these options allows both native PCL files
and ASCII streams forced through the PCL decomposer to be
conditioned with various combinations of carriage returns (CR),
line feeds (LF), and form feeds (FF). Mainframe and UNIX
environments typically requite some form of CR/LF/FF
adjustment.
This utility allows you to set a custom paper size to map to the
PCL escape sequence <esc>&|101A (which denotes “print on
custom stock size”). HP printers generally respond to this
command by imaging an area of 11.7 x 17.7 inches and then
printing the image, centered, on whatever stock is supplied by
the operator. The setpclcontrol utility allows you to specify a
single image and paper size to correspond with this escape
sequence.
NOTE: This utility is now covered on the DocuSP GUI. Select
the PCL tab and make selections to Line Termination.
Set lp/lprcopycount utility
The setlpcopycount utility allows the DocuSP customer to modify
the behavior of how the lp/lpr gateway should handle a copy
count of one. Beginning with DocuSP version 1.41.06, the
default setting ignores a copy count of one placed on the job by
the lp/lpr submission protocol. This allows the internal copy
count set by the PDL to take precedence. The following utility
allows a customer to return the DocuSP to its original behavior:
either imply a copy count of one when none is specified or honor
a copy count of one if specified on the command line. This copy
count of one will take precedence over the copy count set by the
PDL.
Syntax of the utility:
setlpcopycount -f option
0 - Specifies that LP will set a copy count of
1 if received.
1 - Specifies that LP will ignore a copy count
of 1 if received.(default)
No option will display current setting
Example:
docusp_printer% su root
Password:
# cd /opt/XRXnps/bin/
# ./setlpcopycount -f 0