Filter
Top Products
Printing System Guide
5-8 Common Controller
• Use a TIFF orientation tag value of 8 to eliminate the need to
rotate the image.
• Use single strip image data to eliminate additional image data
manipulations.
• Use a value of 1 for Fill Order to eliminate additional image
data manipulations.
Supported TIFF tags
Below is a list of the TIFF tags supported by the DocuSP
software.
Compression
– Default = 1
– DocuSP supports values of 1 (uncompressed), 2 (CCITT
Modified Huffman RLE, 32773 (PackBits), 3 (CCITT Group
3), and 4 (CCITT Group 4).
T4 Option
– Default = 0
– This is used to determine CCITT Group 3 one or two
dimensional coding.
Fill Order
– Default = 1
– DocuSP supports values of 1 and 2.
Image Width and Image Length
– Default = none; values must be supplied.
Orientation
– Default = 1
– DocuSP supports values of 1, 3, 6, and 8. Values of 2, 4, 5,
and 7 are treated as if they were 1, 3, 6, and 8 respectively.
Photometric Interpretation
– Default = none; value must be supplied.
– DocuSP supports bi-level values of 0 and 1 only.
Resolution Units
– Default = 2
– DocuSP supports values of 2 (inches) and 3 (centimeters)
Rows Per Strip