Filter
Top Products
Troubleshooting System Guide
9-16 Common Controller
Configuring XJDC/Unix
The configuration file, CONFIG.TXT found in the directory /opt/
XRXnps/bin/, contains default parameters for the invocation of
XJDC. The text file can be edited using any simple text editor.
The first line of the configuration file must not be edited; it
contains XJDC version information. Each subsequent line
contains a single option; any text following the first word, and any
invalid options, are ignored. Options may be repeated or
contradicted on following lines; the last option specified overrides
previous options. The following sample configuration file is
provided:
XJDC VM10 PDL Compiler
REPLACE
NODISPLAY
PRINT
TRUNCATE
LABEL
COMPILE
SINGLEBYTE
VM10
PAPERSIZE=USLETTER
DATE=US
PAGINATE=60
OUTPATH =/opt/XRXnps/resources/lcds
XJDC Hints and Tips
• If the config file needs to be changed, modify the /opt/
XRXnps/XRXXJDC/data/CONFIG.TXT file. Otherwise, the
default setting in the CONFIG.TXT file will take effect.
• An example for the syntax /opt/XRXnps/bin/XJDC filename
would be: /opt/XRXnps/bin/XJDC /home/XDJCtest/
BASIC.JSL where the filename is represented by /home/
XJDCtest/BASIC.JSL
• The output files are stored under the OUTPATH directory
which is specified in either /opt/XRXnps/bin/CONFIG.TXT file
or command line. For example, if OUTPATH is /opt/XRXnps/
temp/, then all the output files are put in the directory of /opt/
XRXnps/temp.