Filter
Top Products
Troubleshooting System Guide
9-18 Common Controller
Properly ejecting a diskette from the Diskette drive on a DocuSP
workstation
Several problems can arise if you use the eject button on the
floppy disk without first selecting Eject in the software.
To properly and safely eject a floppy diskette (or other
mountable, removable media) perform the following:
1. Select [Setup] and then [Configuration]. The Setup
Configuration window displays.
2. Select the Peripherals tab.
3. Right-click on the drive entitled “floppy0.”
4. From the right-click menu, select [Eject/Unload]. This
dismounts the floppy media, and protects the platform from
damage caused by attempting to eject the media manually.
5. Select [OK] to close the “Removable Media Manager”
window.
6. Now use the floppy eject button to eject the floppy diskette.