Filter
Top Products
System Guide Printing
Common Controller 5-9
– Default = none
– DocuSP supports single and multiple strip images.
NOTE: Strips and tiles cannot be intermixed within the same
TIFF file.
Strip Byte Counts and Strip Offsets
– Default = none; values must be supplied if the image data is
organized into strips.
– DocuSP supports single and multiple strip images.
X and Y Resolution
– Default = none
– Values must be supplied for printing.
Tile Width, Tile Length, Tile Offsets, Tile Byte Counts
– Default = none
– Values must be supplied if image data is organized into tiles.
MICR Enablement
Magnetic Ink Character Recognition Definition (MICR) is a
standard character set which, when printed with magnetic ink,
allows machine recognition of the characters. This is commonly
used in banking for account numbers, routing codes and
amounts on checks. On Xerox MICR printers, the complete page
is printed with magnetic toner and the characteristics of the
MICR fonts allow only the MICR characters to be comprehended
by MICR readers. MICR printing is valued by customers because
it allows creation of documents that can be mechanically
processed and magnetically read by MICR equipment.
MICR fonts are available on a separate floppy. Fonts include:
PCL, PostScript and LCDS. A separate floppy is used to allow
you to control MICR font usage. The supplied soft fonts can be
loaded or deleted using Administration's font installation on the
DocuSP GUI.
NOTE: Only 300 dpi mode is supported for MICR printing.