Filter
Top Products
Network Administration Features
Phaser 7500 Color Printer
System Administrator Guide
28
Protocol Control
This section includes:
• HTTP on page 28
• TCP/IP on page 28
• Port 9100 on page 29
• LPR on page 29
• IPP (Internet Printing Protocol) on page 30
• SNMP (Simple Network Management Protocol) on page 30
• FTP (File Transfer Protocol) on page 31
• Email Server or SMTP (Simple Mail Transfer Protocol) on page 31
• MaiLinX Remote Printing on page 32
• MaiLinX Alerts on page 33
See also:
Discovery Protocols on page 19
All network protocols, including network printing, printing services, printer discovery, and management
protocols can be enabled or disabled on the printer. If a protocol is enabled, you can set configuration
parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents unauthorized
access through applications that use these protocols. For example, if you want to use IPP for a
secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, see the Xerox Technical Support
website www.xerox.com/support.
See also:
HTTP, HTTPS, and SSL/TLS on page 38
TCP/IP
Both IPv4 and IPv6 are supported. If both are turned off, you will lose access to CentreWare IS.
To change TCP/IP settings:
1. Launch your Web browser.
2. Type your printer’s IP address in the browser Address field. For details, see Finding the Printer’s IP
Address on page 14.
3. Click Properties.