Filter
Top Products
Printer Commands
Phaser 7500 Color Printer
System Administrator Guide
76
@PJL XJAUSERNAME=“username” Roman-8 characters
1-255
Sets the file name for Job Accounting.
@PJL XJOBPASSWORD=value 4-digits Assigns the job password used by Secure
Print.
@PJL XPERSONALJOB n/a Starts a Personal Print job.
@PJL XPROOFJOB n/a Starts a Proof Print job.
@PJL XSAVEDJOB n/a Starts a Saved Print job.
@PJL XSECUREJOB n/a Starts a Secure Print job.
@PJL XIGNOREFF=value ON, OFF Ignores FormFeed commands when
printing PCL blank pages.
@PJL XLINETERMINATION=value ON, OFF Terminates a line.
@PJL XMBFSIZE=value ANY or any supported
media size, such as
LETTER, STATEMENT,
and EXECUTIVE
Sets the media size for Tray 1.
@PJL XMEDIASOURCE=value ANY, TRAYn Sets the media source.
@PJL XMEDIATYPE=value ANY or any supported
media type, such as
PAPER and LABEL
Sets the media type.
@PJL XPCLTRAYSWITCH=value ON, OFF Switches trays when a tray becomes
empty. If AutoSelect is chosen as the
paper source (tray) in PCL, then tray
switching is always active, regardless of
the value. When the current tray
becomes empty, the printer attempts to
switch to another tray containing the
same size and type of paper. This
command only takes effect when a
specific tray, such as Tray 2, is selected in
the job. When this command is ON, tray
switching still occurs when the tray
becomes empty. When this command is
OFF, no switching occurs and the user is
prompted to load paper.
PJL Command Values Description