Filter
Top Products
Printer Commands
Phaser 7500 Color Printer
System Administrator Guide
75
Additional PJL Commands
The following table lists the most commonly used HP PJL and additional PJL commands.
See also:
HP Printer Job Language Technical Reference for the standard set of PJL commands.
PJL Command Values Description
@PJL FSAPPEND n/a Appends data to an existing file, or if the
file doesn’t exist, creates the file and
loads it with the given data.
@PJL FSDELETE NAME=“pathname” * Deletes a file from the internal hard drive.
@PJL FSDIRLIST NAME=“pathname” * Lists PJL system files and directories.
@PJL FSDOWNLOAD
FORMAT:BINARY SIZE=size
NAME=“pathname”
* Downloads a file to the internal hard
drive.
@PJL FSINIT VOLUME=value * Initializes the internal hard drive.
@PJL FSMKDIR NAME=“pathname” * Creates the specified directory on the
internal hard drive.
@PJL FSQUERY NAME=“pathname” Responds with information about the file
or directory.
@PJL FSUPLOAD NAME=“pathname” * Uploads file from the printer to the host.
@PJL USTATUS * Allows the printer to send unsolicited
status messages for device status
changes, end-of-job status, and pages
printed. Status can be sent at specified
time intervals.
@PJL USTATUSOFF n/a Turns off all status responses.
@PJL XCLIENTJOBID=value Exactly 48 bytes (first
byte is 8 and the 8 last
bytes represent a time in
the format hhmmsshs)
Sets the client job ID used with
PrintingScout.
@PJL XJAFILENAME=“filename” Roman-8 characters
1-255
Sets the file name for Job Accounting.
@PJL XJAHOSTNAME=“hostname” Roman-8 characters
1-255
Sets the file name for Job Accounting.
@PJL XJAJOBNAME=“jobname” Roman-8 characters
1-255
Sets the file name for Job Accounting.