Filter
Top Products
Security Features
Phaser 7500 Color Printer
System Administrator Guide
56
To configure and enable SNMP v3:
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser Address field. For details, see Finding the Printer’s IP
Address on page 14.
3. Click Properties.
4. On the left navigation pane, select the Protocols folder.
5. Select SNMP.
6. If prompted, enter your Admin or Key User name and password.
7. On the SNMP Configuration page, click the Configure SNMP v3 button.
8. Click the Configure Account(s) button. A series of pages displays that enable you to configure
SNMP v3 and the Administrative User, Key User, and Any User/Driver settings. The first page
displays Administrative User account information after the account has been created.
9. Do one of the following:
• To create the Administrative User account and to enable SNMP v3, enter a user name or
accept the default name admin, then click the Create button.
• To configure the Key User and other account settings, click the Next button.
• To delete the Administrative User account and disable SNMP v3, click the Delete button.
Note: Deleting the Administrative User account and disabling SNMP v3 also deletes all other
accounts, including the Key User and Any User settings.
The Administrative User Account Settings
• User Name: The Administrative User account name defined on the Configure SNMP v3:
Administrative User Account page.
• Authentication Protocols: The protocol associated with the Authentication Key; selected on the
Configure SNMP v3: Administrative User Account page.
• Authentication Key: The Authentication Key defined on the Configure SNMP v3: Administrative
User Account page is displayed as a row of asterisks (*) here.
• Privacy Protocol: The protocol associated with the Privacy Key; selected on the Configure SNMP
v3 Administrative User Account page.
• Privacy Key: The Privacy Key defined on the Configure SNMP v3: Administrative User Account
page is displayed as a row of asterisks (*) here.
• MIB Access: The Administrative User account’s MIB access permissions, which are set to
Read/Write by default.
The Key User Account Settings
• User Name: The Key User account name defined on the Configure SNMP v3: Key User Account
page.
• Authentication Protocol: The protocol associated with the Authentication Key; selected on the
Configure SNMP v3 Key User Account page.
• Authentication Key: The Authentication Key defined on the Configure SNMP v3: Key User
Account page is displayed as a row of asterisks (*) here.