Filter
Top Products
Features
Phaser 7800 Color Printer 23
User Guide
Energy Saver Mode
You can set the time the printer spends idle in ready mode before it automatically transitions to a lower
power level. You can also turn off the automatic transition.
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Setup.
3. Touch Energy Saver.
4. Enable the automatic transition:
a. Select the Enable Energy Saver check box.
b. To change each option, touch Edit:
Ready Mode to Low Power
Low Power to Sleep
c. Enter the minutes from 1–120 using the keypad. The Low Power default setting is 15. The Sleep
default setting is 45.
d. To confirm the change, touch OK, or X to cancel it.
5. To return to the Setup screen, touch OK.
Notes:
To turn off the automatic transition, clear the Enable Energy Saver check box.
The printer exits Energy Saver mode when it receives a print job, or when you press the Power
Saver button.