Filter
Top Products
Maintenance
98 Phaser 7800 Color Printer
User Guide
Moving the Printer
Always use at least three people to lift the printer.
Always turn off the printer and wait for the printer to shut down.
Disconnect the power cord from the back of the printer.
When lifting the printer, grasp the areas as shown.
Keep the printer level to avoid toner spillage.
Note: When moving the printer over a long distance, remove the imaging units and toner cartridges
to prevent toner from spilling. Pack the printer inside a box. For a repacking kit and instructions, go
to www.xerox.com/office/7800support.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not covered by
the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving. The Xerox
®
Total Satisfaction Guarantee is available in the United States and
Canada. Coverage could vary outside these areas. Please contact your Xerox representative for details.