Filter
Top Products
Moving Your DocuPrint NC60
1-16 ❖ DocuPrint NC60 User Guide
Simple Move
1
Power off the printer.
After turning off the printer, allow the Fuser
to cool to a safe temperature before handling.
2
Disconnect the power cord and interface cables.
3
Open the Front Cover (see page 1-12).
4
Open the Top Cover (see page 1-13) and remove the Fuser
assembly.
5
Place the Fuser in a separate box and do not allow the
Fuser to tip. Keep the Fuser level during transportation.
It is critical to keep the Fuser level at all times
during transportation. Permanent damage can
occur to the printer if the Fuser is allowed to tip,
spill oil, and be placed back into the printer.
6
Close the Top and Front Covers.
7
When the printer arrives at its new location, reinstall the
Fuser assembly.
If there is evidence of oil on the outside of the
Fuser, or if you suspect oil has been spilled, DO
NOT PLACE THE FUSER INTO THE PRINTER. A new
Fuser should be installed.