Filter
Top Products
The Manual Bypass Feeder Slot
2-12 ❖ DocuPrint NC60 User Guide
How to Use the
Manual Bypass
Feeder Slot
Media inserted in the Manual Bypass Feeder Slot overrides
the Paper Source selection in your driver. You can use this
to print a page (or cover) in a document set on a different
media than the remainder of the document. Simply insert
the media before the page is printed.
To print normally from the Manual Bypass Feeder Slot:
In your printer driver:
1
Select Manual Feed as the Paper Source in the DocuPrint
NC60 printer driver.
2
For envelopes or labels, select the correct option in the
Media Type in the DocuPrint NC60 printer driver.
At your printer:
3
When prompted by the Control Panel message, place the
media print-side down on the Manual Bypass Feeder Tray.
Before you load a sheet of labels into the Manual
Bypass Feeder Slot, make sure that the edges of the
labels are not loose or sticking up. Loose edges can
get stuck when the sheet passes through the
printer and can cause jams that are difficult to
clear.