Filter
Top Products
Loading the Media Tray
2-8 ❖ DocuPrint NC60 User Guide
How to Load the Tray
With Transparencies
Load transparencies in the same way that you load paper.
Use recommended transparencies for optimum
performance. Do not fill the tray with more than 75
sheets or above the maximum transparency fill mark.
Transparency Tray
If your printer has two trays, you can designate one of the
trays as the transparency tray. The printer will
automatically feed from the designated transparency tray
if the media is selected as “Transparency” in the driver.
You can designate a tray as the “Transparency Tray”
through either the printer's Control Panel or the
CentreWare DP software or CentreWare Internet Services.
See the System Administrator Guide on the DocuPrint NC60
CD for more information about how to designate a tray as
a Transparency Tray by using the Control Panel. To
designate a tray by using CentreWare DP, refer to the
CentreWare DP User Guide on the Printer Management
Software CD.
Your DocuPrint NC60 automatically detects transparencies at
the time of printing and adjusts the print settings to optimize
transparency quality.
If you have a designated transparency tray, you can very easily
insert separator sheets after each transparency. See
Chapter 3: Printing for details.