Xerox M118i All in One Printer User Manual


 
Safety Notes
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide 13
Always locate the equipment in an area that has adequate ventilation, and space for
servicing. See installation instructions for minimum dimensions.
Always use materials and supplies specifically designed for your Xerox/Fuji Xerox
equipment. Use of unsuitable materials may result in poor performance.
Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
Never use a plug that lacks an earth connection terminal to connect the product to
an electrical outlet.
Never attempt any maintenance procedures that are not specifically described in the
customer documentation.
This equipment should not be placed in a built-in unit unless proper ventilation is
provided. Please contact your authorized local dealer for further information.
Never remove covers or guards that are fastened with screws. There are no
operator serviceable areas within these covers.
Never locate the equipment near a radiator or any other heat source.
Never push objects of any kind into the ventilation openings.
Never override or “cheat” any of the electrical or mechanical interlock devices.
Never operate the equipment if you notice unusual noises or odors. Disconnect the
power cord from the electrical outlet and contact your local Xerox/Fuji Xerox Service
Representative or Service Provider immediately.
Maintenance Information
Do not attempt any maintenance procedures that are not specifically described in the
customer documentation supplied with your machine.
Do not use aerosol cleaners. The use of cleaners that are not approved may cause
poor performance of the equipment, and could create a dangerous condition.
Use supplies and cleaning materials only as directed in customer documentation.
Keep all these materials out of the reach of children.
Do not remove covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service.
Do not perform any maintenance procedures unless you have been trained to do
them by an authorized local dealer or unless a procedure is specifically described in
the customer documentation.
Ozone Safety Information
This product will produce ozone during normal operation. The ozone produced is
heavier than air and is dependent on copy volume. Adhering to the correct
environmental conditions as specified in the Xerox installation instructions will ensure
that the concentration levels meet safe limits.