Filter
Top Products
Preface
xiii
System Requirements
Proper operation of the WorkCentre for printing and scanning requires that
your PC meets or exceeds the following system requirements:
IBM compatible personal computer:
Minimum configuration: 486DX, 200MHz, 16 MB RAM, 20 MB free
hard disk space*, Windows 3.1x
Recommended configuration: Pentium II, 200MHz, 32 MB RAM,
20 MB free hard disk space*, Windows 3.1x
Windows
®
operating environment (Windows
®
3.1x, Windows
®
95,
Windows
®
98, Windows
®
NT 4.0)
16 MB or more RAM (Windows
®
3.1x), 32 MB RAM (Windows
®
95, 98),
and 32 MB RAM (Windows
®
NT 4.0)
A USB cable is supplied for printing and scanning functions. If you do not
have a USB port on your PC and you want printing and scanning
functions, you must supply an IEEE 1284 bi-directional parallel cable,
maximum 6 feet/2 metres.
* 20 MB minimum hard disk space required for driver installation only. If
installing the additional software, an additional 90MB free hard disk
space is required (70MB for Pagis Pro
®
, 20MB for MGI PhotoSuite
®
).
Xerox provides a print driver, TWAIN scanner driver and Control
Program (for ink cartridge management). Pagis Pro and MGI PhotoSuite
are provided if you do not already have a scanner/image editor program;
these two software applications require Windows 95/98 or NT 4.0.