Filter
Top Products
32 Scanning
Scanning
You can scan a document with the XK35c. When you installed the XK35c
software, the TWAIN driver was also installed. By using a scanning program,
such as Pagis Pro (supplied by Xerox on a separate CD-ROM), you can use
the XK35c scan function.
While every scanning program is different, follow the basic steps outlined
here to invoke the scanner driver tab menus.
Starting the Scan Process
To start the scanning process:
1
Ensure that your WorkCentre is properly connected to the computer, the
machine is powered on and the Display shows the message
001
.
2
Verify that you have installed the TWAIN driver software for your
machine. See
Installing Software
.
3
With your PC and Windows running, start your scan program. You may
have the program represented on your desktop with an icon, or it may be
accessed by selecting
Start>Programs>
[program name].
4
Select
File>Acquire
or
Acquire Image>Select Source
in the File menu
to bring up a list dialog. Select
Xerox WorkCentre XK Series
, then
select
OK
. If the
Acquire
command is not available, you will need to use
another scan program. The Pagis Pro software program provides an
Acquire function.
5
Select
File>Acquire Image >Acquire
to invoke the XK35c scanner
driver.
ª