Filter
Top Products
Copying 37
Making a single Copy
Follow this procedure when you need to make a single copy of your original
document.
1
Make sure the WorkCentre is powered on. Load paper in one of the
paper feeders. The Display should show the message
001
.
2
Open the platen cover. Make sure the
glass is clean. Load the document on
the document glass facing down and
pushed against the left and rear
guides.
3
Close the platen cover.
NOTE:: If you do not close the platen cover or the document is not
evenly in contact with the document glass, scanning quality will be
severely reduced.
4
Press the
Start
button. The machine will make one copy with the
following features:
Normal resolution
Normal contrast
Plain paper type
100% copy size (same as original)
Single copy
Color mode
5
For other copy features and functions, see the next section
Using the
Copy Menu Features
.