Filter
Top Products
Maintenance
48
Cleaning the Cartridge Carrier Contacts
1
Lift the scanner module. Lift the cartridge compartment lid/support up so
the scanner module rests on the top edge of the lid/support.
2
Press the
Menu
button until the code
U01
appears in the Display.
3
Press
Start
.
4
Unplug the power cord from the rear of the WorkCentre.
5
Remove both ink cartridges.
6
Use a CLEAN, LINT FREE, DRY CLOTH to clean the ink cartridge
carrier contacts on the back wall of the carrier.
7
Reinstall the ink cartridges.
8
Close the cartridge compartment lid/support and the scanner module.
9
Plug the power cord into the WorkCentre.
10
Test the ink cartridges by running the Clean Print Head procedure. If the
print quality is still unacceptable, contact your local Xerox Helpline.