Filter
Top Products
Maintenance
51
Cartridge Alignment
You should print the cartridge alignment test if vertical lines or characters
appear crooked. The cartridge alignment test will straighten the vertical lines.
To Align the Cartridge from your PC:
1
Open the Xerox WorkCentre Control Program on LPT1. Refer to
Starting
the Xerox WorkCentre Control Program
and to
Using the Cartridges Tab
.
2
Click
Align Cartridges
.
3
The printer feeds a sheet of paper and prints the alignment test pattern.
4
Examine the test print.
If the vertical lines are straight, no adjustment is needed.
If the lines are not straight, select the number in which the lines appear
the straightest and click
OK.
To Align the Cartridge Using the WorkCentre Control Panel:
1
Press the Menu button on the Control Panel repeatedly until the
Message Code
U02
appears in the Display.
2
Press
Start
.
NOTE: The machine will time out after one minute if
Start
is not pressed,
and will return to Standby Mode. The Display will then show
001
.
Press
Menu
repeatedly until you see the code
U02
displayed, then
press
Start
to repeat the cartridge alignment process.
3
An alignment test pattern sheet will print during which time the Display
will show
L-P
. Review this sheet in response to the next series of six
Display messages.
ª