Filter
Top Products
NOTE: The plastic media core can be obtained from an
authorized Zebra supplies reseller.
7. Release the media hangers so the plastic media core locks into the
correct position.
8. Place the fanfold media in the fanfold media tray.
9. Swing up the media access door. Thread the fanfold media through the
slotbeneaththenotchonthemediaaccessdoor(refertoFigure12).
10. Swing open the media access door. Continue to insert the media into
the printer and under the plastic media core until it appears beneath the
printhead. Make sure the media is threaded under both media guides.
If you’re using direct thermal media, continue on with step 11.
However, if you’re using thermal transfer media, you must also install
aribboncartridge.Proceedto“LoadingtheRibbon”inthischapter.
11. Swing up the media access door, ensuring that the media extends over
thetearbar(refertoFigure13).
12. Lift to hook the top of the media access door over the top cover.
13. Push in the bottom of the media access door to close.
14. Turn on the printer or press the Feed button if the printer is already on.
14