Filter
Top Products
Operator Controls
Refer to Figure 17.
Power Button
•
Press to turn on the printer.
•
To turn off the printer, press and hold until the Power LED flashes once.
(Holding the button for approximately two seconds acts as a safeguard.
That way, no data will be lost if the button is accidentally pressed or
bumped.)
CAUTION: The power should be turned off before connecting
or disconnecting the communications cable.
Feed Button
• Forces the printer to feed one blank label.
•
Takes the printer out of a “pause” condition. (The printer is put into
“pause” by either a software command or an error condition.) See
Troubleshooting.
•Usedforprintersetupandstatus(see“FeedButtonModes”in
Troubleshooting).
18
Feed
Button
Error
LED
Power
LED
Power
Button
Figure 17