Filter
Top Products
802.11n Wireless Print Server User Manual
26
Properties –TCP/IP Options
The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each
option is detailed as follows.
Obtain an IP address from a DHCP server:
This option enables or disables the DHCP feature of the print server. When this
option is enabled, the print server will obtain an IP address automatically from the
DHCP server on your LAN. The default value is “Disabled”.
Note: 1. Once this option is enabled, the following IP address, Subnet Mask,
Gateway will be grayed out and are not available for editing.
2. While the print server supports DHCP, we strongly recommend you
manually specify a fixed IP address to the print server.
Specify an IP address:
IP Address:
This option shows the print server’s current IP address maybe obtained
from your DHCP server or manually specified. This option also allows you to
manually specify an IP address to the print server, if DHCP option is
disabled.
Subnet Mask:
This option shows the print server’s current subnet mask maybe obtained
from the DHCP server or manually specified. This option also lets you
manually specify a subnet mask to the print server, if DHCP option is
disabled.