Filter
Top Products
802.11n Wireless Print Server User Manual
27
Gateway:
This option shows the print server’s current gateway address maybe
obtained from the DHCP server or manually specified. The option also
allows you to manually specify the IP address of the gateway to the print
server, if DHCP option is disabled. This value is optional
Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade
the unit please perform the steps as follows:
1. Click Upgrade button just like a picture ＜ ＞, as shown as follow picture
2.
S
elect General Upgrade. Make sure that the upgrade file is located in
the same directory as PSAdmin.
Reset
1. Click Reset button just like a picture ＜ ＞.
2. Reset allows the user to reset the print server device in order to establish a
new connection or for new settings to take effect.