Filter
Top Products
802.11n Wireless Print Server User Manual
78
Multi-Segment Frame Type 802.2 Installation
1. From your Windows NT server that is used as a router, select Start from the
bottom left hand corner of the screen.
2. Point to Settings, and select Control Panel.
3. Double-click the Network icon.
4. Select Protocols.Select the NWLink IPX/SPX Compatible Transport.
5. Select Properties.
6. Select your (first) network interface card and select Manual Frame Type
Detection.
7. Click Add.
8. In the Frame Type field, select Ethernet 802.2.
9. In the Network Number field, type in an unique 8-digit hexadecimal
network number. For example: 12345ABC.
10. Select Add.
11. Repeat the Steps 8-12 for the other Ethernet adapter.
12. Restart the computer.
13. Done.
Moving the print server to A New Segment
If the print server is moved from one network segment to another after the initial
installation, through the Network Print Port, the print server must be reconfigured
on the original Windows NT server or on each Windows 95/98 computer using this
print server in order for the print server’s driver on each computer to re-establish
a new connection.
Print Server Reconfiguration Procedure on Windows
95/98/Me
1. Click Start on the bottom left hand corner of the screen.
2. Select Settings and select Printers.