Zonet Technology ZPW4000 Printer User Manual


 
802.11n Wireless Print Server User Manual
48
TCP/IP Setup:
1. Click Setup, it then appears the sub-menu.
2. Click TCP/IP, it then as shown in the following picture.
DHCP/BOOTP:
This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print
server to obtain IP-related settings automatically from your DHCP
server.
IP Address:
This option allows you to input IP address from the print server. The
IP address must meet the IP addressing requirements of the network
segment.
*Note:On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask:
This option allows you to input subnet mask from the print server. The
IP address must meet the IP addressing requirements of the network
segment.
Default Router:
This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of
the network segment.