A SERVICE OF

logo

802.11n Wireless Print Server User Manual
55
Users can set up print server’s SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Community:
The print server supports up to two community names. The default
community name is public (case-sensitive), with Read Only access
right in default.
Support HP WebJetAdmin:
This option allows user determine to disable/enable the Support HP
WebJetAdmin.
SNMP Traps:
Enable the function of sending SNMP Authentication Failure trap
message to the network administrator, if the community name within
a SNMP request is not correct.