Filter
Top Products
802.11n Wireless Print Server User Manual
52
3. AppleTalk Zone:
In this option, type an AppleTalk Zone name that you want the print
server to belong to or leave it in default (This enables the print server
automatically search and link itself to the default zone that is set on
the AppleTalk router, if found). We also assume that at least an
AppleTalk Zone exists on the network. If no any zone exists, the print
server itself displays the zone name as an asterisk (*) in the current
AppleTalk Status of the print server in the web browser.
4. Port Name:
In this option, type a name for identification purpose or just leave it in
default (recommended).
Note: The default print server’s Chooser name is as shown as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the
device’s Node ID. For example: ATALK_PS-40EEED-1. You may also change the
<ATALK_PS> to a name you like for identification purpose in this option. The
print server will append the last six digits to the name you specify.
5. Type:
In this option, the LaserWriter of printer type by default
(recommended).
6. Binary Protocol:
In this option, data format includes ASCII, TBCP and BCP.