Filter
Top Products
802.11n Wireless Print Server User Manual
34
5.
Configuration from Embedded Web
Server
Overview
The Print Server contains an embedded web server that can be accessed through
a supported web browser on a LAN, for example, Microsoft Internet Explorer 6.0
or higher, Mozilla Firefox 3.0 or higher, etc.
The embedded web server provides access to configuration and management
pages for the print server and the connected peripheral device.
Using Embedded Web Server
Before you can use the embedded web server, the print server must be
configured with an IP address. There are many ways to configure the print
server’s IP address. For example, the Windows-based of PSAdmin utility can
easily set an IP address with the print server, please see the Properties – TCP/IP
options of chapter 3.
After an IP address is established on the print server, perform the following step:
Status Menu
Once you have finished the IP address configuration with print server. You should
be use web browser to view and management the print server. The status menu
of the print server helps administrator control the print server’s System, Printer,
NetWare, TCP/IP, SNMP and AppleTalk of status for the time being.
Preparation
Enter the print server’s IP address in the Address field of your Web browser. Press
Enter. Then the print server page will appear. From here you can configure all
print server settings.
Please follow this information in the status menu of the print server:
System Status
1. Click Status, it then appears the sub-menu.
2. Click System, it then as shown in the following picture.