Filter
Top Products
1 In the Security Configuration window, click the Encryption
Mode drop-down arrow and select WPA2-Enterprise.
2 In the IEEE 802.1X Authentication area, note that the check
box marked Enable IEEE 802.1X authentication for this
network is selected. With IEEE 802.1X authentication, each
wireless device (client) sends a signal to the wireless access
point, which in turn sends the signal to the RADIUS server.
The server determines whether or not the client is allowed to
join the network.
3 Click the EAP (Extensible Authentication Protocol) Type
drop-down list and select an authentication protocol:
• PEAP (Protected Extensible Authentication Protocol –
the (default). With PEAP, you can select from three
authentication extensions:
MS-CHAPV2. Microsoft’s version of CHAP
(Challenge-Handshake Authentication Protocol
(default)
GTC
TLS/SmartCard
• TLS (Transport Layer Security). There are no
authentication extension options with TLS.
• TTLS (Tunneled Transport Layer Security). With TTLS,
you can select from four authentication extensions:
19
Chapter 2: Setting Security