Filter
Top Products
To disconnect from the current network:
1
From the Start menu, select Connect to.
2 In the Disconnect or Connect to another network dialog
box, select the current network and click Disconnect.
In the Are You Sure? message box, click Disconnect again.
3 In the next dialog box, you can connect to another network or
click Close to complete the disconnect procedure.
Installing and connecting on
Windows XP, 2000, Me and
98SE
1 Insert the USB Adapter CD into your CD drive. The CD
should start automatically. (If it does not, on the Windows
desktop click the Start button, click Run, and then type
e:\setup.exe where e is the letter of your CD drive.)
2 On the Language Selection screen, select your language.
3 On the next screen select Installation Wizard, and then on
the following screen select USB.
4 Windows Me users: if prompted, restart your computer.
5 Follow the prompts to complete the installation.
Windows 2000 users: If the Digital Signature Not Found
message appears, click Yes to continue.
6 On the final screen, click Finish.
7 On the Zoom installation screen, click Exit, remove the
installation CD, then turn off your computer.
(If the Zoom screen is minimized to a button on the taskbar,
maximize the screen so you can exit the installation.)
8 While the computer is off, plug the USB adapter into a USB
port on your computer.
9 Turn the computer back on. Windows will find your new
hardware. If you see an Unsigned driver message, click
Continue anyway.
8
Wireless-G USB Adapter