Filter
Top Products
Chapter 9 Signature Update
ZyWALL USG 100/200 Series User’s Guide
195
Figure 144 Licensing > Update > System Protect
The following table describes the fields in this screen.
Table 45 Licensing > Update > System Protect
LABEL DESCRIPTION
Signature
Information
The following fields display information on the current signature set that the
ZyWALL is using.
Current
Version
This field displays the system protect signature and anomaly rule set version
number. This number gets larger as the set is enhanced.
Signature
Number
This field displays the number of signatures in this set. This number usually gets
larger as the set is enhanced. Older signatures and rules may be removed if they
are no longer applicable or have been supplanted by newer ones.
Released
Date
This field displays the date and time the set was released.
Remote Update Use these fields to have the ZyWALL check for new signatures at myZyXEL.com.
If new signatures are found, they are then downloaded to the ZyWALL.
Update Now Click this button to have the ZyWALL check for new signatures immediately. If
there are new ones, the ZyWALL will then download them.
Auto Update Select this check box to have the ZyWALL automatically check for new signatures
regularly at the time and day specified.
You should select a time when your network is not busy for minimal interruption.
Hourly Select this option to have the ZyWALL check for new signatures every hour.
Daily Select this option to have the ZyWALL check for new signatures every day at the
specified time. The time format is the 24 hour clock, so ‘23’ means 11PM for
example.
Weekly Select this option to have the ZyWALL check for new signatures once a week on
the day and at the time specified.
Apply Click this button to save your changes to the ZyWALL.
Reset Click this button to return the screen to its last-saved settings.