Filter
Top Products
Chapter 46 Reports
ZyWALL USG 100/200 Series User’s Guide
731
Figure 544 Maintenance > Report > Session
The following table describes the labels in this screen.
Table 260 Maintenance > Report > Session
LABEL DESCRIPTION
View Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions by user
sessions by services - display all active sessions by service or protocol
all sessions - filter the active sessions by the User, Service, Source Address,
and Destination Address, and display them by user.
The User, Service, Source Address, and Destination Address fields are only
available when all sessions is selected.
Refresh Click this button to update the information on the screen. The screen also refreshes
automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields have no
effect until you click the Search button, even if you click the Refresh button.
User This field is only available when all sessions is selected. Type the user whose
sessions you want to view. It is not possible to type part of the user name or use
wildcards in this field; you must enter the whole user name.
Service This field is only available when all sessions is selected. Select the service or
service group whose sessions you want to view. The ZyWALL identifies the service
by comparing the protocol and destination port of each packet to the protocol and
port of each services that is defined. (See Chapter 37 on page 613 for more
information about services.)
Source Address This field is only available when all sessions is selected. Type the source IP
address whose sessions you want to view. You cannot include the source port.
Destination
Address
This field is only available when all sessions is selected. Type the destination IP
address whose sessions you want to view. You cannot include the destination port.
Search Click this button to update the information on the screen using the filter criteria in
the User, Service, Source Address, and Destination Address fields.
sessions per
page
Select the number of active sessions displayed on each page. You can use the
arrow keys on the right to change pages.