ZyXEL Communications 200 Series Network Router User Manual


 
Chapter 10 Interface
ZyWALL USG 100/200 Series User’s Guide
205
10.3 The Port Role Screen
To access this screen, click Network > Interface > Port Role. Use the Port Role screen to set
the ZyWALL’s flexible ports as part of the lan1, ext-wlan or dmz interfaces. This creates a
hardware connection between the physical ports at the layer-2 (data link, MAC address) level.
This provides wire-speed throughput but no security.
Not the following if you are configuring from a computer connected to a lan1, ext-wlan, or
dmz port and change the port's role:
1 A port's IP address varies as its role changes, make sure your computer's IP address is in
the same subnet as the ZyWALL's lan1, ext-wlan, or dmz IP address.
2 Use the appropriate lan1, ext-wlan, or dmz IP address to access the ZyWALL.
Figure 148 Network > Interface > Port Role
Expand/Close Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.
Name This field displays the name of each interface. If there is a Expand icon (plus-sign)
next to the name, click this to look at the statistics for virtual interfaces on top of this
interface.
Status This field displays the current status of the interface.
Down - The interface is not connected.
Speed / Duplex - The interface is connected. This field displays the port speed and
duplex setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the ZyWALL on the
interface since it was last connected.
RxPkts This field displays the number of packets received by the ZyWALL on the interface
since it was last connected.
Collision This field displays the number of collisions on the interface since it was last
connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the interface in
the one-second interval before the screen updated.
Rx B/s This field displays the reception speed, in bytes per second, on the interface in the
one-second interval before the screen updated.
Table 48 Network > Interface > Status (continued)
LABEL DESCRIPTION
Physical Ports
Interfaces