Filter
Top Products
System Maintenance 119
9. RXPkt - the number of received packets on this channel.
10. Error - the number of error packets on this channel.
11. CLU - (Current Line Utilization) - percentage of current
bandwidth used on this channel.
12. ALU - (Average Line Utilization) - average CLU for this
channel.
13. Up Time - time this channel has been connected to the current
Remote Node.
14. Total Outgoing call Time - shows the total outgoing call time
for both B1 and B2 channels since the system has been
powered up.
15. Ethernet - shows the current status of the LAN connection on
your Prestige.
16. Link - shows the current status of the LAN (Up or Down if it is
10Base-T; otherwise, if it is configured as AUI, this will show
AUI).
17. TX Pkt - the number of transmitted packets to LAN.
18. RX Pkt - the number of received packets from LAN.
19. Collision - number of collisions.
20. Name - displays the system name of your Prestige. This
information can be modified in Menu 1 - General Setup.
21. RAS S/W Version - refers to the version of the current RAS
software.
22. ISDN F/W Version - refers to the version of the current ISDN
firmware.
23. Ethernet Address - refers to the Ethernet MAC address
assigned to your Prestige.