Filter
Top Products
52 Remote Node Configuration
4. Incoming: Rem Node Login Name - Enter the login name that
this Remote Node will use when it calls into the Prestige. The
login name in this field combined with the Rem Node Password
will be used to authenticate the incoming calls from this node.
5. Incoming: Rem Node Password - Enter the password used
when this Remote Node calls into the Prestige.
6. Incoming: Rem CLID - This field is active only if Call
Direction is either Both or Incoming. Otherwise, an N/A
appears in the field. This is the Calling Line ID (the telephone
number of the calling party) of this Remote Node. If you enable
the CLID Authen field in Menu 13 - Default Dial In, the
Prestige will check this number against the CLID in the
incoming call. If they do not match and the CLID Authen is
Required, then the Prestige will reject the call.
7. Incoming: Call Back - This field will be valid only if Call
Direction is Both. Otherwise, an N/A appears in the field. This
field determines whether or not you wish the Prestige to call
back after receiving a call from this Remote Node. If this
option is enabled, the Prestige will disconnect the initial call
from this node and call it back at the Outgoing Primary Phone
Number (see below).
8. Outgoing: My Login Name - This is a required field if Call
Direction is either Both or Out. Enter the login name for the
Prestige when it calls this Remote Node.
9. Outgoing: My Password - This is a required field if Call
Direction is either Both or Out. Enter the password for the
Prestige when it calls this Remote Node.
10. Outgoing: Authen - This field sets the authentication protocol
used for outgoing calls.
The Prestige supports two authentication protocols: PAP
(Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol).