Filter
Top Products
Installation 35
9. Analog Call Routing - All analog calls will be routed to the
modem if the setting is Modem. Or they will be routed to the
A/B Adapter if the setting is A/B Adapter. Or they will not be
answered if the setting is Ignore.
10. Global Analog Call - : All global analog calls will be
answered and routed to the modem or A/B Adapter (the setting
in the filed of Analog call routing) if the setting is Accept. Or
they will not be answered if the setting is Ignore.
When you are finished, press ENTER at the message: Press
ENTER to Confirm ... to save your selections, or press ESC to
cancel. When you press ENTER, the Prestige will use the
information that you entered to initialize the ISDN link to the
telephone company switch. It should be noted that whenever the
switch type is changed, the ISDN initialization will take slightly
longer. In addition, if you are using the U-interface, the system will
also take slightly longer to initialize.
At this point, the Prestige will ask if you wish to test to check if
your ISDN line has been successfully connected to your Prestige. If
you select Yes, the Prestige will perform a loop-back test to check
the ISDN line. If the loop-back test fails, note the error message
that you receive and take the appropriate troubleshooting action.
Figure 3-10 ISDN Loop-Back Test Screen