Filter
Top Products
128 System Maintenance
perform the upload. After uploading is successful, power off
the Prestige, and then power it back on to restart.
Command Interpreter Mode
This option allows the user to enter the command interpreter mode.
This mode allows you to diagnose, test, and configure your Prestige
using a specified set of commands. A list of valid commands can be
found by typing help at the command prompt. For more detailed
information, check the ZyXEL Web site or send email to the
ZyXEL Support Group.
Call Control
The Prestige provides two Call Control Management functions for
the Remote Node and Remote Dial-in User. They are the Budget
Management and Blacklist. The Budget Management function
provides the budget control for the outgoing call and a way for
users to set a limit on their ISDN utilization to prevent any
accidental usage. It limits the total outgoing call time of the
Prestige over a period of time for each Remote Node & Remote
Dial-in User (callback only). If the total outgoing call time exceeds
the set limit, future outgoing calls will not be made and the current
call will be dropped.
The Blacklist function prevents the Prestige from re-dialing to an
unreachable phone number. It is a list of phone numbers, up to a
maximum of 14, to which the Prestige will not make an outgoing
call. If the Prestige tries to dial to a phone number and fails a
certain number (configurable in the menu 24.9.1) times, then the
phone number will be put onto the blacklist. The user has to enable
the number manually again to be dialed.