Filter
Top Products
Installation 23
• U interface - This allows you to connect directly to your ISDN
wall jack.
22
11
27(27(
7
+(
,6'1
-$&.,6)25
,6'1
/,1(&211(&7,2121/<
&
211(&7,212)$3+21(
/,1(0$<5(68/7,1'$0$*(72<285
3
5(67,*(
$$
77(17,2177(17,21
/
$),&+(
,6'1
(67'(67,1e(81,48(0(173285/$&211(;,2168581(/,*1(
51,6/
$&211(;,2168581(/,*1(7e/e3+21,48(3(87(1'200$*(59275(
$'$37$7(85'(7(50,1$/
Connecting a Telephone/Fax to your Prestige
You can connect a regular telephone, a fax machine or a modem to
your Prestige to be used for analog calls. It should be noted that
this is optional and is not required for you to run other applications
using your Prestige.
Plug one end of the telephone cord from a phone or fax or modem
into the socket on the rear panel of the Prestige labeled PHONE.
In order to receive incoming calls using a device connected to the
PHONE port, you need to enter Voice in the Analog Call field
under the desired telephone number (e.g., 1st phone #) in SMT
Menu 2 - ISDN Setup. See Collecting ISDN Phone Line
Information in Chapter 2 for more details.
Connecting an Ethernet Cable to your Prestige
The Prestige supports two types of Ethernet connections. The
connection procedure differs for each one; follow the one that is
appropriate for your installation.
• UTP
The UTP port is used to connect to a 10Base-T network. 10Base-T
networks use Unshielded Twisted Pair (UTP) cable and RJ-45
connectors that look like a bigger telephone plug with 8 pins. Two
types of gray Ethernet cables come with the package: