Filter
Top Products
34 Installation
be added to all outgoing calls and should be no longer than 3
digits. Otherwise, leave this field blank.
7. PBX Number (with S/T Bus Number) - Enter the S/T bus
number if the Prestige is connected to an ISDN PBX. If this
field is left as blank then the loopback test will be skipped.
8. Incoming Phone Number Matching - There are three options
in this field:
Multiple Subscriber Number (MSN) - The digital call will
only be answered when there is a match for the ISDN data
number. The analog call will be answered as a modem call
when there is a match for the modem number. Or it will be
answered as A/B Adapter call when there is a match for the
A/B Adapter number. If no modem or A/B Adapter number is
specified, then the analog call will not be answered. This option
will be available as EAZ (Endgeraete Auswahl Ziffer) for
1TR6.
Called Party Sub-Address (CDSA) - The digital call will be
answered when there is a match for the ISDN Data subaddress.
The analog call will be answered as a modem call when there is
a match for the modem subaddress. Or it will be answered as
A/B Adapter call when there is a match for the A/B Adapter
subaddress. If no modem or A/B Adapter subaddress is
specified, then the analog call will not be answered. This option
is only available for DSS1.
Don’t care - all numbers accepted - All digital calls, including
global calls (without CDPN and CDSA in the call setup), to any
CDPN (Called Party Number) will be answered. All analog
calls will be routed to the modem, A/B Adapter, or not
answered. This depends on the setting of ‘Analog Call
Routing’. All global analog calls will either accept or not
answer them depending on the setting of Global Analog Call.