Filter
Top Products
58 Remote Node Configuration
4. Multiple Link Options: Base Trans Rate - Select the base
data transfer rate for this Remote Node. This parameter is in
kilobits per second (Kbps). There are two options for this field:
• 64 - Only one channel will be used.
• 128 - Two channels will be used when a packet triggers a
call.
5. Multiple Link Options: Max Trans Rate - Enter the
maximum data transfer rate allowed for this Remote Node. This
parameter is in kilobits per second. There are two options for
this field:
• 64 - At most one channel can be used.
• 128 - A maximum of two channels can be used.
6. Multiple Link Options: Target Utility - Enter the two
thresholds separated by a - for subtracting and adding the
second channel. The default is 32-48.
7. Multiple Link Options: Add Persist - This parameter
specifies the number of seconds there traffic is above the
adding threshold before the Prestige will bring up the second
channel. The default is 5 seconds.
8. Multiple Link Options: Subtract Persist - This parameter
specifies the number of seconds where traffic is below the
subtraction threshold before the Prestige drops the second
channel. The default is 5 seconds.
Once you have completed Menu 11.2 - Remote Node PPP
Options, press ENTER at the message: Press ENTER to Confirm
... to confirm your selections, or press ESC to cancel your
selections.