Filter
Top Products
Configuring for Internet Access 43
Figure 4-2 Menu 4 - Internet Access Setup
1. From the Main Menu, enter 4 to go to Menu 4 - Internet
Access Setup as seen above.
2.
ISP’s Name -
Enter the name of your Internet Service
Provider, e.g., myisp. This information is for identification
purposes only.
3.
ISP IP Addr -
Enter the IP Address of the remote gateway at
the ISP’s site. If you do not have this data, just leave it blank.
4.
Pri(mary) Phone #
and
Sec(ondary) Phone Number -
Both
the Primary and the Secondary Phone number refer to the
number that the Prestige will dial to connect to the ISP. The
Prestige will always call your ISP using the Primary Phone
number first. If the Primary Phone number is busy or does not
answer, the Prestige will call the Secondary Phone number if
available. Once connected, the Prestige will use the BACP
(Bandwidth Allocation Control Protocol) to establish the
second B-channel if PPP/MP is enabled, and the ISP also
supports MP and BACP.
5.
My Login Name -
Enter the login name given to you by your
ISP.