Filter
Top Products
84 Novell IPX Configuration
Figure 8-5 NetWare Servers on Both Sides of the Link
This may present a problem if you desire your client station to
access a server at a remote site. For example, in the above diagram,
suppose that a client station on the network on the left wishes to
access the NetWare server on the right (internal network number =
111). However, the SAP broadcasts will receive a response from
the server on the left (internal network number = 444). A static
route is used to resolve this problem by providing the Prestige with
some static routing information to access the remote server.
From Menu 12, select one of the four possible IPX Static Routes as
shown below: