Filter
Top Products
Novell IPX Configuration 83
6. Hop Count - This field indicates the number of intermediate
networks that must be passed through to reach the Remote
Node. The default is one (1).
7. Tick Count - This field indicates the time-ticks required to
reach the Remote Node. The default is two (2).
8. W/D Spoofing (min) - This field is used for the Prestige on the
server side LAN. The Prestige can spoof a response to a
server’s WatchDog request after the connection is dropped. In
this field, enter in the time (number of minutes) that you want
the Prestige to spoof the WatchDog response.
9. SAP/RIP Timeout (min) - This field indicates the amount of
time that you want the Prestige to maintain the SAP and RIP
entries learned from this Remote Node in its internal tables
after the connection has been dropped. If this information is
retained, then the Prestige will not have to get the SAP
information when the line is brought back up. Enter the time
(number of minutes) in this field.
Once you have completed filling in the Network Layer Options
Menu, press ENTER to return to Menu 11.1. Press ENTER at the
message: Press ENTER to Confirm ... to save your selections, or
press ESC at any time to cancel your selections.
Static Route Setup
If your LAN-to-LAN application has NetWare servers on both
sides of the link, then all NetWare client stations will have access
to a server on their LAN as shown below: